CPC805 - Fastwel CPC805 EPIC CPU Board with Intel Atom N450 1.66...
- Part Number:
- CPC805
- Model Number:
- CPC805
- Make:
- FASTWEL
- Lead Time:
- Available
- Qty In Stock:
- Available
Fastwel CPC805 EPIC CPU Board with Intel Atom N450 1.66 GHz and COM104 expansion connector Simple Type: CPU Board
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 2GB DDR2 SDRAM (soldered)
- 32-bit PCI, LPC, PCI-E, SMBus
- 4GB NAND flash
- COM104 expansion connector
- Compact flash socket
- Industrial operating temperature range: –40°C to +85°C
- Intel Atom N450 processor (1.66 GHz)
- Protective coating (option)
- PS/2 keyboard/mouse port
- Six COM ports
- Two 10/100/1000 Mbit/s ports
- USB 1.1, 2.0 port
- VGA, LDVS interfaces
Specifications
- Audio: AC'97 codec (HD Audio); Onboard connector (LineIn, LineOut, MicIn)
- CompactFlash Type II socket: PIO & BMIDE support; Ultra ATA 100/66/33 support
- Dimensions: 165 mm × 115 mm
- Ethernet: Two LAN 10/100/1000 Mbit ports using twoPCI-E x1 links: Switchable between front panel and COM104 (A) connector.
- Flash BIOS: 8 Mbit SPI-Flash
- Flash-disk: 2 (4) GB NAND Flash (2 (4) channels), IDE interface: 40 (80) MB/s read, 30 (70) MB/s write
- FRAM Memory: 64 Kbit, 256 B RAM for storage of Bios Setup parameters; SPI bus
- Graphics: VGA: resolution up to 1400×1050 @ 60 Hz, front panel connector; LVDS: resolution up to 1280×800 @ 60 Hz, single channel mode, onboard connector
- Hardware Monitor: SMBus based; Three power voltages monitoring; CPU and PCB temperatures monitoring.
- Indicators: Startup diagnostics LED; IDE/SATA activity; Ethernet channels LEDs (Link/Act); Two programmable LEDs
- LPC Bus: Routed to COM104 (A) and Service connectors; Support for specification v1.0; Support for two Master/DMA devices
- Memory: DDR2 SDRAM 667 MHz w/o ECC up to 2 GB (soldered)
- MTBF:: Not less than 100 000 hours
- Operating Systems: MS DOS 6.22, FDOS 6.22; Windows XP (Embedded); Linux 2.6; QNX 6.4.
- Operating temperature: From –40°C to +85°C
- PCI Bus: Routed to COM104 (B) connector; Support for specification v.2.3; 32-bit/33 MHz; Up to 4 bus master devices
- PCI-E Bus: Routed to COM104 (A) connector; Compatibility with PCI-E 1.1 specification; Up to four ?1 devices (2.5 Gbit/s); Possibility to set x4 link (10 Gbit/s)
- Power: Via external power connector from ATX source (+5V, +12V, -12V, +3.3V, +5V_STBY voltages plus PS_ON signal); From unipolar power source, 7V…30V; From PC/104-Plus (COM/104) power supply module, 10 W power consumption
- Processor: Intel Atom N450 1.66 GHz
- PS/2 Keyboard/Mouse Port: Onboard connector
- Real Time Clock: CR2032 (3V) lithium battery backup
- SATA II Interface: Up to 300 MB/s tranfer rate; One onboard connector with Innodisk SATA DOM support; Two interfaces are routed to COM104 (A) connector.
- Serial Ports: ???1, COM2: RS232 (up to 1.5 ?baud), front panel connectors; COM3, COM4: RS232 (up to 1.5 ?baud), TTL level, available at COM104(A); COM5, COM6: RS422/485 (up to 460 Kbaud), isolated, onboard connector
- SMBus: Conforms to specification v.2.0; Up to 100 Kbps; Routed to COM104(A) connector
- SPI Interface: Support for up to 4 devices (CS); Up to 25 MHz frequency; Routed to COM104 (A) connector.
- Universal parallel port: SPP, EPP, ECP modes support; Onboard connector
- USB Port: USB 1.1 (12 Mbps), USB 2.0 (480 Mbps); Up to 4 devices connection via front panel\ connectors; Up to 6 devices via COM104 (A).
- Watchdog Timer: Internal, programmable
Applications
- None Available
Aliases
- None Available
Related Items
CAN OPC Server
OPC server for Controller Area Network- CAN OPC
Windows application providing OPC Data Access interface for CAN 
CPC1600-01-P1.4-RAM512-C
Fastwel CPC1600-01-P1.4-RAM512-C, PC/104-Plus Intel Pentium M 1.4 GHz, 400 MHz- CPC1600-01-P1.4-RAM512-I
Fastwel CPC1600-01-P1.4-RAM512-I, PC/104-Plus Intel Pentium M 1.4 GHz, 400 MHz